Home > PHOTOLUMINESCENT
SIGNS & MARKINGS
PHOTOLUMINESCENT / LUMINOUS EXIT SIGNS & EGRESS TAPES & MARKERS
photoluminescent UL 924 listed EXIT signsPhotoluminescent egress and fire safety signsPhotoluminescent marking tapes for stairwells, doors, stairs and handles
When safety and compliance are a priority, our premium photoluminescent products provide lifesaving value and reliability, as well as cost savings in energy and maintenance. Nationwide Building codes (IBC and IFC) include luminous egress path marking and signage. Follow best practices, show "good intent" and stay compliant with our various luminous signage, marking tapes, and UL-924 listed Exit Signs.

  • Photoluminescent Safety Egress Signage

    PHOTOLUMINESCENT FIRE EXIT & SAFETY SIGNS
    The IBC (International Building Code) and IFC (International Fire Code) require luminous exit/egress path markings in all new and existing institutional, hotel, educational, business, public assembly and all R-1 residential buildings having occupied floors that are more than 75 feet above the lowest level of fire department vehicle access (this is generally five floor levels, or 5 stories.) Photoluminescent markings are required in exit enclosures on the steps, landings, handrails, perimeters and obstacles. Our photoluminescent signs meet or exceed standards and codes set by many organizations and municipalities, and are manufactured from low profile rigid plastic sheet substrate materials which are safe, non-toxic, and non-radioactive. Our photoluminescent signage requires no maintenance, electricity, bulbs or battery replacement. This premium material substrate meets UL 1994 Standard for Luminous Egress Path marking Systems and is acceptable to use in most building egress signage applications for code compliance and saving lives.


    More Info ›

  • Photoluminescent Tapes and Marking Products


    P    HOTOLUMINESCENT TAPES & MARKING PRODUCTS


    More Info ›

  • Photoluminescent UL 924 Listed EXIT Signs


    P    HOTOLUMINESCENT UL 924 LISTED EXIT SIGNS
    Our photoluminescent "glow-in-the-dark" luminous EXIT signs are made from recycled environmentally friendly aluminum, and include two directional Chevrons (arrows) that can be hand applied in the field. Available with or without an aluminum frame which can be used for wall projection or ceiling mount. Signs are ETL listed to UL-924 and UL-746C, and acceptable in most building egress signage applications. Engineered with safe non-radioactive chemical light source and requires no maintenance, bulbs or battery replacement. Illumination is safe and uniformly consistent. At full charge, this material glows for a minimum of 90 minutes. Code Complaint to NFPA 1 (Fire code) | IBC | IFC (International Fire Code 1011.4) | ICC (International Code Council) | OSHA (E-910.35 & E-910.37) | NFPA 101 (Life Safety Code.) Legible viewing distance is 50 feet. Made in the USA.

    More Info ›